Production Analysis
The purpose of this function is to launch a production analysis between an analysis start date and an analysis end date along two possible axes:
- A resource axis (analysis at work center and work center group level)
- A product axis (analysis at work order level)
It is possible to select an analysis along one of the two axes or the two axes simultaneously.
The analysis can be carried out for a list of production sites.
This function does not generate any print directly but it loads the tables that will be subsequently used for the print-outs.
Prerequisite
Refer to documentation Implementation
Screen management
Entry screen
Presentation
Analysis axes
The purpose here is to select along which axes (resources, products, or both) an analysis should be carried out.
Analyses along the resource axis
The axis of analysis deals with all the work orders that have been the subject of at least one tracking.
The analysis based on the resource axis scrutinizes each work center and calculates:
- The use of each work center, i.e. the ratio between the planned times and the achieved times for each work center.
- The yield of each work center, i.e. the ratio between the planned times and the achieved times.
Analyses along the Product axis
This axis of analysis deals with all the work orders that have been closed.
The analysis based on the product axis scrutinizes each product and generates data according to several criteria:
- Delay analysis: Comparison between the calculated end date (last automatic scheduling before tracking) of the work order and the first entry date (date upon which the first production reporting has been carried out).
- Lead time analysis: Comparison of the production lead times (product site record/lead time calculated by the last automatic scheduling/achieved lead time).
- Time analysis: Comparison of the load times (defined in the routing standard operations, defined in the work order, entered in the operation tracking of the work order)
- Operating yield
- On the quantity: Comparison between the achieved quantities and the rejected quantities at the level of each operation
- On the time: Comparison between the achieved time and the effective time
- Material yield: Comparison between the components used with respect to the effective planned use
Analysis along two axes.
The production analysis is carried out in that case along the two axes
Analysis period
The period proposed by default corresponds to the month preceding the processing date. This range is used to determine the orders that will be analyzed.
It is important to note that the results of the analysis carried out on the period from 01/01/00 to 31/01/00 remain available for printing as long as another analysis with an end date on the 31/01/00 has not been started (the same end date)
Site table
This table is used to select the production sites that should be the subject of an analysis.
The site shown by default corresponds to the site associated with the user.
Close
Fields
The following fields are present on this tab :
Analysis dimension
|
Selection of the type of analysis to be carried out. |
Analysis period
|
Processing period start date. |
|
This field contains the processing period end date. |
Grid Site list
|
Enter or select a storage site at which the selected product is active. The Selection icon (magnifying glass) only suggests products that are referenced in the products-sites table. |
|
|
Close
Batch task
This function can be run in batch mode. The standard task FUNANL is provided for that purpose.