Common data >  Manufacturing tables >  BC division rules  

Display all Hide all

This function is used to set up division rules for the barcode (BC). The apply to the fields that can be subject to a recheck. These are the fields defined at the level of the parameter ITMCTL - Product recheck (weighing) (Manufacturing chapter, WEI group).
 
These rules are used when displaying the barcode reading at the WO recheck screen level.
SEEINFO In the recheck screen, the field displaying the barcode reading results is only present when the parameter CUTCAB - BC division in recheck is set to 'Yes'.

Two types of divisions are possible:

  • division according to the fields separator,
  • division according to a fixed length.

There can be, at most, one division rule by site.

Prerequisites

SEEREFERTTO Refer to documentation Implementation

Screen management

Entry screen

Fields

The following fields are present on this tab :

Block number 1

  • Rule (field CUTCOD)

 
  • Description (field CUTAXX)

 

 

BC division rules

  • BC type (field TYPCAB)

In this field, specify the format type of the BC.
The fields of the Separator and Fixed length blocks are available depending on the type of format selected and on the fields that can be subject to a recheck. These are the fields defined at the level of the parameter ITMCTL - Product recheck (weighing) (Manufacturing chapter, WEI group): Product code and/or Lot code and/or Sub-lot code.

  • If the BC format is of type Field separator, specify:

    - the numbers of the fields contained in the BC,
    - the character used as a separator.
     
  • If the BC format is of type Fixed length, specify:
     
    - the length of fields,
    - the start position of each fields contained in the BC.
     
    The end position is calculated automatically.
  • Blank deletion (field SUPBLC)

Check this box to indicate that the blanks present in the recovered fields (product, lot) must be deleted.

Separator

  • Product code: field no. (field NUMITM)

 
  • Separating character (field ITMSET)

 
  • Lot code: field no. (field NUMLOT)

 
  • Separating character (field LOTSET)

 
  • Sublot code: field no. (field NUMSLO)

 
  • Separating character (field SLOSET)

 

Fixed length

  • Product code: field length (field ITMLON)

 
  • Start position (field ITMDEB)

 
  • End position (field ITMFIN)

 
  • Lot code: field length (field LOTLON)

 
  • Start position (field LOTDEB)

 
  • End position (field LOTFIN)

 
  • Sublot code: field length (field SLOLON)

 
  • Start position (field SLODEB)

 
  • End position (field SLOFIN)

 

Close

 

Error messages

The only error messages are the generic ones.

Tables used

SEEREFERTTO Refer to documentation Implementation