Fixed assets >  Concession >  Assets in concession >  Attribute update  

Display all Hide all

This function is available only if the CCN activity code – Concession is activated and if the asset transmission by renewal is managed.

It authorizes the mass modification of one of the following information of a selection of assets in company concession. As a matter of fact, this update is no longer directly authorized for assets after they have been created:

  • Renewal date
  • Contractual Renewal Obligation
  • Flag Asset transmitted against indemnity
  • Update code

Notes:

  • The update of attributes is forbidden on issued assets.
     
  • It is also prohibited to update the Contractual renewal obligation of assets to renew which are part of a renewal preparation operation.

SEEINFO In order to ensure the integrity of the information displayed in the selected assets, the assets are locked during the process. Nevertheless, the inquiry of assets is authorized.

Prerequisites

SEEREFERTTO Refer to documentation Implementation

Screen management

This function is composed of:

  • A header, to specify the processing options and to choose the company and the financial sites to which the assets to be processed belong
     
  • The Action parameter tab, used to specify the attribute to modify
     
  • The Extended selection tab, used to select the assets to be processed.
Screen management method

The management is the same for this window as for all the mass process functions that can be applied to assets.

Process setup

First, it is necessary to set up the processing or use the Call button to recall an existing processing saved under a Memo code.

The setup of the processing consists in:

- Entering the processing options. By default, the process is carried out in Simulation mode and generates a Detailed log file presenting the values of the various parameters applied during the process, the details of the old and new values for each of the updated assets and the list of assets containing errors, as well as the error reason.

-Selecting the company and the potential other financial sites where the assets are registered.

- Entering the parameters linked to the update.

- Carrying out the selection of assets potentially involved in the process (Extended selection tab).

SEEINFO When the setup of a process is completed, it is possible to save it under an identification code using the Memo button. It is then possible to recall it at a later date for use in an update.

Running the process

Once the setup is performed, it is possible to:

  • Either directly apply the entered parameters to each of the selected assets, by clicking OK. A consistency check on the new value is carried out; if there is an error for an asset, the previous value is kept and an error message is inserted in the log file report. 
     
  •  Or go through an intermediate control stage of the entered parameters by clicking the Check button.
     
    A window is displayed. It contains the list of selected assets and gives the value of the modified attribute for each asset. This modification can have an impact on the Effective renewal obligation. Therefore, the value of this flag is also displayed.
     This window is also used to identify by color display the potential lines with errors along with the corresponding error messages. The assets with errors are not updated; they are displayed with their original values.
     
    SEEINFO The assets that correspond to the selection criteria but with unchanged parameter values, do not appear as errors. They are excluded from the list of assets.
     
  • Click the End button to close the control window; the setup entry window is displayed again, which makes it possible to either confirm the mass update by clicking the OK button or the End button to cancel the update.

Header

Presentation

The header contains the processing options and is used to select the company, as well as the site(s) in which the assets are registered.

  • Simulation:
    This box, checked by default, is used to carry out an attribute modification simulation on the selected assets. The modification of the assets is not recorded in the database.
     
    The impact of the processing on the assets can be viewed in the log file displayed at processing completion.
     
  • Detailed log file:
    A log file is systematically displayed upon completion of the process, which shows the process options, the selection criteria, the update setup as well as the number of selected assets, the number of updated assets and the number of assets not processed as a result of an error. Assets with errors are listed with the reason of the error.
     
    When this box is ticked, the log file is displayed in the form of a detailed report presenting, in addition to the information listed above, the list of assets successfully processed. The value of the attribute is displayed for each asset before and after the update.
    SEEINFO The viewing and printing of log files are possible at any time via the report code ATRACE - Print log file print request, obtained from the Supervisor function in the Print/Group print menu.

Close

 

Fields

The following fields are present on this tab :

Options

  • Simulation (field FLGSIM)

This box is checked by default. It specifies that the processing is carried out in simulation mode. In this case, the controls and the process are carried out but no modification of the database is recorded.

  • Report (field FLGETA)

This indicator can be accessed only when one or several reports are linked to the massive process. In this case, the activation of this indicator enables the user to print these reports.

  • Detailed log file (field FLGDET)

A log file is automatically displayed on process completion, showing the processing parameters. A Statistics section gives the number of selected assets, the number of assets updated as well as the number of assets not processed due to an error. Assets with errors are listed with their error reason.

When this box is ticked, the log file is displayed in the form of a detailed report presenting, in addition to the information listed above, the list of assets successfully processed.

The viewing and printing of log files are possible at any time via the report code ATRACE - Print log file print request, obtained from the Supervisor function in the Print/Group print menu.

Grid Company selection

  • field FLGCPY

Help common to all the mass processings.
The grid displays the list of the managed companies for which the user is authorized.
Check a box to select the company which must be processed.
After selecting a company, all the financial sites that are linked to it are selected by default. You can selectively de-select those that are not concerned by the processing.
You can also select directly the site(s) to be processed. In that case, the company to which they are attached is automatically selected.

SEEINFO When the company setup ACCPERCTL - Control of accounting periods (chapter AAS, group CPT) has the value 'Yes', the company is not displayed in the list if at least one of its contexts is not synchronized with the accounting period/fiscal breakdown. The desynchronization status of a context is visible in the screenDetailed status of contexts that can be accessed from the Actions icon.In that screen, on the Calculation tab, the field Modification type has the value 'CNX' and the field Modified parameter has the value 'DESYNC'.In this case, it is necessary to launch the processing of Contexts synchronization.

The Identification Code for the company.

Grid Site selection

  • field FLGFCY

The grid displays the list of the sites attached to the companies and for which the user has authorizations.
Check this box for the site to be taken into account in the processing.
After selecting a company, all the financial sites that are linked to it are selected by default. You can selectively de-select those that are not concerned by the processing.

Identification Code for the company which the site is linked to.

Identification code of the site.

Close

 

Company selection – Site selection

These tables display both the list of managed companies for which the user is authorized and the list of financial sites corresponding to these companies where the user is authorized.

SEEINFO When the company parameter ACCPERCTL - Control of accounting periods (chapter AAS, group CPT) has Yes for value, the company is not displayed in the list as soon as at least of one its context is not synchronized with the accounting period/fiscal breakdown. In this case, it is necessary to launch the Context synchronization process.
The desynchronization status of a context can be viewed on the Detailed status of contexts, Calculation tab (the value of the Modification type field is set to: CNX and the value of the field Modified parameter is DESYNC).

It is necessary to select the company and the sites in which the assets involved in the processing, are registered. After the selection of the company, all the sites linked to the company are selected by default. The user can de-select those that are not concerned by the processing.
Provided they belong to the same company, the site(s) involved in the processing can be directly selected, in which case the company to which they belong is automatically selected.

Reminder: the assets must be registered in sites attached to the same company. Selecting a second company, or sites linked to another company, leads to the de-selection of the first company selected, after validation of a confirmation message.

After having selected the company or the site(s), it is possible to refine the selection by entering other selection criteria in the dedicated Extended selection tab.

Tab Parameter definition

Presentation

This tab is used to:

  • Select the attribute to modify: Renewal Provisional date, Renewal Contractual Obligation, Transferred against indemnity and Update code.
     
    SEEINFOIt is not possible to modify several attributes simultaneously.
     
  • To enter the new value of this attribute as well as the update reason.

Close

 

Fields

The following fields are present on this tab :

Attributes

  • Renewal (field UPDTYP)

Select, by activating the corresponding radio button, the attribute to modify. The update can be on one attribute at a time.

Values

  • Provisional date (field RNWDAT)

Help common to the unitary and mass processing of terms update.
This field can only be accessed if the chosen modification is on the provisional date.
In unitary process, this field displays the asset renewal provisional date whether it has been forced or not and is used to enter a new renewal date. When it is a forced date, the right clock option To recalculate by the application is used to "unforce" it and retrieve the original date.
In massive process, if no date is entered, the renewal date will be considered as not forced. The application will then hesitate between the depreciation write-off if the plan that manages the industrial depreciation.
When a date is entered, it must be later than or the same as the current FY start of the plan that manages the industrial depreciation.

  • Contractual obligation (field OBYRNWCON)

Help common to the unitary and mass processing of terms update.
This flag can be only be accessed if the modification that has been chosen concerns the contractual renewal obligation.
The flag value needs to be indicated for the asset/S to update.
In unitary process, this flag cannot be set to Yes and then No when the asset is an asset to renew part of a pending renewal operation.
In massive process, the assets that correspond to the selection criteria but that also correspond to the criteria mentioned above are excluded from the process.

  • Transmitted against indemnity (field TPAFLG)

Help common to the unitary and mass processing of terms update.
This flag can be only be accessed if the modification that has been chosen concerns the Transmitted again indemnity.
The flag value needs to be indicated for the asset/S to update.

  • Update code (field CCNACTCOD)
  • Reason (field REN)

This mandatory field is used to specify the reason for the modification.

Close

 

Tab Extended selection

Presentation

This tab is used to enter the asset selection criteria.

It contains five lines, each of them used to enter a criterion, with each criterion being linked to the next one by one of the following logical operators: And, Or.

The process for selection criteria entry is as follows:

1/ Enter, or select from the list obtained by a right click in the field in the asset table FXDASSETS which contains the information to which the selection is applied.

2/ Then select the operator: Any, Equal, Different, Greater than or equal, Less than, Less than or equal, Like.
The Like operator is valid only for numeric fields. It allows the use wild cards.

3/ Enter a value. The list of possible values for the chosen field can be obtained with a right click when these values are contained in a local menu or in a table (miscellaneous table, common table, accounting table, etc.).

The user can also:

- enter the criteria in the form of an expression; the formulas of this type can be entered by right-clicking the fields in the asset table FXDASSETS,

- enter a selection formula by calling the formula editor.

Reminder: The selection options are the same as those used in the standard Advanced selection function. For more information, see the documentation on the application object ergonomics.

Close

 

Fields

The following fields are present on this tab :

Block number 1

Block number 2

  • field FLD1

Indicate a field from the table.
  • field DES1

Libellé du champ.
  • field OPE1

Indicate the comparison operation:

  • The "indifferent" operator is used to obtain all records of an object.
  • The '* ?' operator is used to define wildcards.
  • field VAL1

Indicate the comparison value (without quotation marks for the alphanumeric fields).
  • field PAR1
  • field ANDOR2

Indicate the link between criteria lines.

Example :

If Expr1 and Expr2 or Expr3 (Expr = expression) are entered we would have :

(Expr1 & (Expr2 | (Expr3)))

Block number 3

  • Expression (field EXP1)

Indicate if necessary an expression to complete the search.

The criterion is added to the previous criteria by the link AND.

The expression cannot contain fields from a table other than the principal table for the object. These can be indexed.
  • field PAREXP

Si cette case est cochée, l'expression est définie comme valeur par défaut modifiable.

Close

 

Processing description

A non-simulated update carries out following operations:

  • Application of the new value of the modified attribute.
  • Update of each of the fixed assets according to the processing terms described below.
  • Generation of an event FASCCN - Attributes update.

Updating the renewal provisional date results in:

  • Setting the asset on To recalculate at provision level.
  • Updating the provisional date with the entered date. When no date is entered, the modification will apply only to the assets for which the date has been entered, and will result in de-forcing this date and load it with the end date of the asset industrial depreciation.

Updating the contractual obligation results in:

  • The asset being set to To recalculate at provision level.
  • Possibly modifying the position of the Effective renewal obligation flag.

Refreshing the update code results in:

  • Setting the asset to To recalculate at provision level.
  • Updating the asset with the entered update code.

Updating the Transferred against indemnity flag results in:

  • Setting the asset toTo recalculate at provision and depreciation level.

If the flag changes from No to Yes:

  • The depreciation method of the plan managing the amortization is set to SA. If the depreciation method was AR, a method change event would be generated, and have as the effective date:
    - either the fiscal year start date when the depreciation total on fiscal year start is equal to 0, 
    - or the depreciation start date if the asset has a depreciation total on fiscal year start. The adjustment of this total is calculated as Exceptional depreciation for the period. This results in the recovery of the total for the previous period end in the period depreciation expense and the recovery of the total for the previous fiscal year end on period exceptional depreciation.
  • The Effective Renewal Obligation flag is deactivated.
  • The asset and the Accounting and fiscal context are set to To be calculated.
  • The provisions for renewal are reversed.

If the flag changes from Yes to No:

  • The depreciation method of the plan managing the amortization moves to AR with an end date based on the concession end date. A method change event is generated with the period start date as the effective date.
  • If the asset has been subject to a contractual renewal obligation and if the industrial depreciation end date is prior to the concession end date, the Effective renewal obligation flag is automatically activated.
  • The asset and the Accounting and fiscal context are positioned as To be calculated.
     
    The user can view the events in the Event journal window that can be accessed from the Other info tab of the Assets management function.

Specific Buttons

This button triggers the display of a control window that contains a grid with the list of selected assets. This list can be updated by deleting the lines corresponding to the assets to be excluded from the process.
The potential lines with errors are identified by color display.

Click this action to save the current settings in a Memo code to be reused later. The memo is linked to your user profile, not to the function or the screen.

If a memo code entitled STD is associated with the screen, it is loaded immediately on entering the corresponding function.

For further information on the advanced use of the Memo action, refer to the documentation on the General ergonomics of SAFE X3 software.

Click this action to enter a Memo code previously saved and change the setup.

Click this action to delete a Memo code.

Error messages

The only error messages are the generic ones.

Tables used

SEEREFERTTO Refer to documentation Implementation