Sales >  Deliveries >  Pick ticket deliveries  

Display all Hide all

Use this function to perform a mass generation of deliveries from picking tickets.

Mass validation of transportation notes

To perform the mass validation of transportation notes, you must check that the shipping dates comply with the requirements in terms of shipment start and end dates and times. This is important because you can only communicate future transport dates, not transport dates in the past.

Select the Activate check box in the Transport Information block to modify dates accordingly.

For example, a shipment was scheduled for a date prior to the date on which you want to perform the mass validation, but you know it will be shipped within the next three days. You can modify the date to a future date by adding '3' days to the No. days betw. transport start date and ship date field to comply with shipment requirements. This modification allows you to carry out the mass validation.

You still have the option to validate individual transportation notes, but with large datasets, individual validation is not always practical.

Prerequisites

SEEREFERTTO Refer to documentation Implementation

Screen management

SEEWARNING When the sales orders are manually locked with the SCDTUNL - Authorization to unlock order parameter (VEN chapter, AUZ group), they cannot be selected. You need to unlock them in the Orders function (GESSOH).

Entry screen

Fields

The following fields are present on this tab :

Block number 1

 

Enter a shipment site code that corresponds to a storage site.
If no value is entered in this field, the processing takes into account all existing stock sites for which orders are allocated but not delivered. 

The shipment site is loaded by default with the your storage site. 
 

 

    Source

    • Orders (field FLG1)

    By default, all the categories are selected. You can deselect one or more categories.

    When selecting a category, you must specify the Delivery type.
    This information is used to group picking tickets on automatic delivery generation. The counters used to create the deliveries are also specified by the delivery type.
    The delivery types specified in this block are used by default for picking tickets for which no delivery type has been specified.
    They are initialized with the values of the following general parameters, but you can modify the delivery type.

    SEEINFO Only delivery types belonging to the same category as the source elements can be specified.
    The legislation and company group for which they are defined must be consistent with those of the company of the shipment site.
     SEEREFERTTOLearn more about group legislation    .
    • Loan orders (field FLG2)

     

    When selecting a category, you must specify the Delivery type.
    This information is used to group picking tickets on automatic delivery generation. The counters used to create the deliveries are also specified by the delivery type.
    The delivery types specified in this block are used by default for picking tickets for which no delivery type has been specified.
    They are initialized with the values of the following general parameters, but you can modify the delivery type.

    SEEINFO Only delivery types belonging to the same category as the source elements can be specified.
    The legislation and company group for which they are defined must be consistent with those of the company of the shipment site.
     SEEREFERTTOLearn more about group legislation    .
    • Subcontract requirements (field FLG3)

     

    When selecting a category, you must specify the Delivery type.
    This information is used to group picking tickets on automatic delivery generation. The counters used to create the deliveries are also specified by the delivery type.
    The delivery types specified in this block are used by default for picking tickets for which no delivery type has been specified.
    They are initialized with the values of the following general parameters, but you can modify the delivery type.

    SEEINFO Only delivery types belonging to the same category as the source elements can be specified.
    The legislation and company group for which they are defined must be consistent with those of the company of the shipment site.
     SEEREFERTTOLearn more about group legislation    .

    Selection

    • Shipments until (field SHIDAT)

    Enter the shipping date used to select elements to be processed:

    • Order lines to be delivered
    • Deliveries or picking notes for load preparation, validation, and invoicing

    All the elements with a shipping date on or before this date are included.
    • From picking ticket (field PRHNUMSTR)

     
    • To picking ticket (field PRHNUMEND)

     
    • From ship-to customer (field BPCORDSTR)

    This field is used to select a customer or a customer range by entering the sold-to customer code.

    • Start: first customer concerned in the range.
    • End: last customer concerned in the range.

    If only one customer needs to be selected, the code must appear in both Start and End fields.


     
    • Address (field BPAADDSTR)

    This field is used to select one of the delivery addresses of the selected customer.

    When two fields are available (Start/End), it is possible to select a range of several delivery addresses for the same customer.

    SEEINFO If the Start/End fields use a customer range, this address field cannot be used.
    • To ship-to customer (field BPCORDEND)

    This field is used to select a Carrier.

    • Address (field BPAADDEND)

    This field is used to select one of the delivery addresses of the selected customer.

    When two fields are available (Start/End), it is possible to select a range of several delivery addresses for the same customer.

    SEEINFO If the Start/End fields use a customer range, this address field cannot be used.
    • From carrier (field BPTNUMSTR)

    This field is used to select a Carrier.

    • To carrier (field BPTNUMEND)

     
    • From route code (field DRNSTR)

    This field is used to select a route code. 
    If you select Yes, you need to enter the required route code and only orders with this route are processed.


     
     
    • To route code (field DRNEND)

    This field is used to select a route code. 
    If you select Yes, you need to enter the required route code and only orders with this route are processed.


     
     

    Validation

    • Delivery validation (field CFMDLV)

    Select this check box to validate the delivery after generation.

    Print packing slip

    • Packing slip (field NDEFLG)

    Select this box to print the document (pick ticket, packing slip or invoice) after delivery or invoice creation.

    In that case, you need to specify:

    • The document: it defaults to the report code linked to the object being used
    • The print server, if any
    • The printer, if any

    Enter the standard document code to be printed.

    Enter the document or report destination.
    The destination must exist in the Destinations table, which is where its characteristics are defined (issue type, printer, server etc.).
    • Server (field NDESRV)

    This field is used to define the print server.
    This setup is sent at the print request from a Crystal Reports report.
    • Printer (field NDEIMP)

    Default printer.

    Transport information

    • Activate (field ENA)

    Select the Activate check box to change the dates and times of the transport through the validation process. When the transport information associated with this indicator is modified, the dates and times are updated in the selected records.

    • No. days betw. transport start date and ship date (field STRDAYS)

    Enter the number of days between the shipment date and the transport start date.

    This action rewrites the departure date as shipment date plus N days.

    This field is only available if the Activate check box is selected.
    • No. days betw. transport end date and ship date (field ENDDAYS)

    Enter the number of days between the shipment date and the transport end date.

    This action rewrites the arrival date as Ship date plus N days.

    This field is only available if the Activate check box is selected.
    • Transp. starting hour (field STRHOU)

    Use this field update the transport starting hour.

    This field is only available if the Activate check box is selected.
    • Transp. ending hour (field ENDHOU)

    Use this field update the transport ending hour.

    This field is only available if the Activate check box is selected.

    Close

     

    Specific Buttons

    Click this action to save the current settings in a Memo code to be reused later. The memo is linked to your user profile, not to the function or the screen.

    If a memo code entitled STD is associated with the screen, it is loaded immediately on entering the corresponding function.

    For further information on the advanced use of the Memo action, refer to the documentation on the General ergonomics of SAFE X3 software.

    Click this action to enter a Memo code previously saved and change the setup.

    Click this action to delete a Memo code.

    Limitations

    There is no control to check that the lines of a full order on delivery do appear in the same delivery.

    Error messages

    The only error messages are the generic ones.

    Tables used

    SEEREFERTTO Refer to documentation Implementation