Expected operation tracking co
This parameter is used when recording production activity for a work order. This is referred to as "tracking".
When recording production activity for a work order against a specific operation, this parameter defines if the operation must be tracked in order, based on the routing defined for the work order.
No - This is the default value for this parameter. No controls are required. The operations required to manufacture a product can be tracked in any order. They do not have to be tracked in the order of the routing defined for the work order.
Yes, without block - The operations required to manufacture a product should be tracked in order, based on the routing defined for the work order. If, however, a previous operation has not been tracked, the previous operation will be skipped so that the tracking can be recorded.
Yes, with block - The operations required to manufacture a product must be tracked in order. Each operation defined by the route defined for the work order must be tracked in order, none can be skipped.
A work order must be at Firm status (Order status field (MFGSTA) in the Home section of the Work order function (GESMFG)) to track production activity for it.
Level of localization/Global variable
This parameter is defined at the level Company. It belongs to Chapter GPA (Manufacturing) and the Group CTL (Production tracking controls), The following parameters are also associated with this chapter and group :
- CTLALL (Control component allocations)
- CTLCLE (Blocked in closing)
- CTLFICTEC (Technical sheet control)
- DOSFAB (Printing WO documents)
- MTKALLMGT (Allocation to the WO mandatory)
- SFTAUTOBRK (Auto breaks)
- SFTELPDEF (ADC elapsed time default)
- SFTEMPCLK (Employee clock in/out)
- SFTOFFSET (Time zone difference)
- WOMMVTWAI (Pending stock mvt control)
The global variable GCTLOPEPRE is associated with it.
Functions concerned
The following functions are associated with this parameter :
Manufacturing > Production tracking > Time tracking plan
Manufacturing > Production tracking > Shop floor tracking > Employee activity
Manufacturing > Production tracking > Shop floor tracking > Shop floor tracking
Manufacturing > Production tracking > Production tracking
Usage > Imports / exports > Imports
for import MKO (Import operation tracking)
ADCs > Manufacturing > Shop floor tracking > Elapsed labor
ADCs > Manufacturing > Shop floor tracking > Run start
ADCs > Manufacturing > Shop floor tracking > Setup start